Now that the paint on the trailer frame is done, I can start some of the assembly. First was to install the floor panel. This also includes a trim piece at the front and a filler panel in the rear. 


Then I could install the under carriage and axles supports. 



Even though they really are not needed, I am making some roll on ramps for the trailer. I made some connectors for the ramps from some old hinges I had on hand. I have a couple long ¼ inch bolds to use to hold the ramps to the trailer. 



As seen in the pictures above and below, I have finished the pin striping on the trailer. Still have a lot left to do on the trailer. 



With the trailer moving along, I can also get started on the wagon. The first part will be assembling the frame. This part should take too long. 




Comments

Post a Comment

Popular posts from this blog

Image
  During our first trip to the Grand Design RV Rally in 2022, the husband of one of the group administrators referred a folding wagon he used to transport things as an “stupid wagon”. Prior to the 2023 rally, it was announced that there was going to be an stupid wagon contest. I took our plastic garden wagon and pulled it around with a light up Christmas reindeer wearing a Hawaiian shirt. Someone pulling a little Radio Flyer wagon won the contest. In 2024, we did not attend the rally. The winner of the stupid wagon contest was a decorated standard sized Radio Flyer wagon. I decided then that I needed something totally different to wow the rally goers and win the Stupid Wagon contest. I decided to build a low-rider wagon. I had seen pictures of some, and they looked pretty cool. I started a search for a wagon a few months ago but wasn’t having much luck. Then my daughter and her husband had to move, and they were selling off some stuff to raise some money. One of the items they ...
Read more
Image
 Got something in the mail a few days ago for the wagon. This is actually available if someone wanted to get a personalized license plate. 
Read more
Image
Part of my low-rider wagon build is what to do with the left-over parts, the axles supports and the handle. I thought I should build another wagon from the parts, all I needed was some tires and a platform to put stuff on. Then one morning while laying in bed, I had an epiphany, build a trailer for the low-rider wagon. Because of the expense of building the low-rider has exceeded my expectations, I decided to do this build as cheap as possible. The first part was cleaning the leftover parts, they were pretty oxidized like the wagon tub. Instead of using a rubbing compound, I just used some spray cleaner and a piece of Scotch-Brite. Everything came out looking good enough, the only painting I may do is spray a bit of black on the rusty spots. I have some wood slats from a bed in my shed and decided to use one to build the frame the bed. I’m not sure what kind of wood it is but it’s fairly heavy. It measures 2¼ by 1 inch. The outside of the frame measures 52 by 28 inches. I will add some...
Read more